Wall installation guide

01.

STEP ONE

Unpack your wall kit from the pink pouch. You will also need a drill and a screwdriver to install

02.

STEP TWO

Line your sign up on the wall and hold it up straight. You may need two people for this depending on the size of your sign

03.

STEP three

Grab a pen and make a mark on the wall through the pre drilled holes on the sign

04.

STEP four

Put your sign back on the side and drill holes through the markings you made on the wall. Be sure to use the right size drill bit for the raw plugs we have provided

05.

STEP five

Insert the raw plugs into the wall, grab your screws and metal wall spacers. Unscrew the cap from the wall spacer to reveal a hole

06.

STEP six

Grab a screwdriver and drive the scew through the metal wall spacer into the rawplug in the wall

07.

STEP seven

Once you have installed all of the wall spacers into the wall, grab your sign again and line it up with the wall spacers

08.

STEP eight

Grab the wall spacer end caps and screw this through the holes on the sign and into the wall spacer

09.

STEP nine

Stand back and admire your Marvellous new sign!